With the rapid development of science and technology, a variety of smart electronic products make our lives faster and more convenient, but these smart electronic products will also cause us some troubles when charging, such as because of the use of smart mobile phone charging ports are different, you need to prepare several different charging cables at home. When traveling on business or traveling with your family, you need to bring several different charging cables. Although this is a small matter, it is because you need to bring a few different charging cables, there are too many charging cables need to bring, sometimes you will forget.
Baseus 3 in 1 cable exists to solve the problem of too many charging cables. What is a 3 in 1 cable? The functions and appearances of current smartphones are not much different, but the charging ports are not uniform. Android phones support both micro USB and Type-C interfaces, while iPhone phones support the Lightning interface. The charging interface is different, and the charging cable used is also different, which is very unfriendly to users who often need to use multiple mobile phones. In order to solve this problem, the 3 in 1 cable was born. The 3 in 1 cable is also called the multi-function data cable. It adds a combination scheme to the original data cable and is equipped with a combination PCB, which can support a variety of devices, eliminating frequent trouble finding the data cable. It integrates three interfaces of micro USB, Type-C and Lightning, compatible with a variety of devices, and can be connected to any smart phone or tablet.
Is Baseus 3 in 1 cable worth buying? The Baseus 3 in 1 cable uses mainstream braided wire, which can bear a load of 20Kg. In this way, it can fully cope with daily pulling. Baseus 3 in 1 cable uses pure copper core inside, which has the advantage of no loss during charging and high conversion capacity. These are the characteristics that a high-quality data cable should have.
At the connector of the data cable, there is a tiny smart recognition chip for fast charging, smart recognition of fast charging devices helps it control current and voltage properly and ensure safe fast charge.
In addition to providing us with regular charging services, Baseus 3 in 1 cable can also be used for data transmission.
Baseus 3 in 1 cable minimizes the messy situation of the desktop cable at home. The quality of Baseus 3 in 1 cable is very good. The use of nylon pull wire and strengthened structure design can improve the user experience. The three cable interfaces apply more mainstream fast charging solutions, USB-C / PD 20W, Lighting / 3A, Microsub / 2A, which are more friendly to users of Huawei / Honor / Xiaomi / Apple and old interface devices.
Using an infrared thermal imager to test the heating of three cables at the same time, it can be seen that the temperature of the cable joints is relatively low, about 27°C. The place with the greatest heat generation is at the branch line because it undertakes the task of partial pressure and shunting, about 31°C, but it will not be hot at 31°C, so there is basically no need to worry about overheating.
In general, Baseus 3 in 1 cable is considered one of the best 3 in 1 cables in the industry, right? It not only solves the problem of inconvenient storage of multiple lines, but also takes into account fast charging, and can also be used as a data line. At the same time, it can effectively prevent the problem of cable overheating caused by simultaneous charging of multiple devices. Baseus 3 in 1 cable is still worth buying.
Thank for this post info dud